Mechanical

Dimensions 442 x 285 x 44 mm (17.4 x 11.2 x 1.7″)
Weight Without mounting brackets: 3.9 kg (8.6 lb)
With mounting brackets: 4 kg (8.8 lb)
Enclosure material SGCC steel

Hardware

Management interface Ethernet In-Band
Networking interface (48) GbE RJ45 ports
(4) 1G SFP ports
Total non-blocking throughput 52 Gbps
Switching capacity 104 Gbps
Forwarding rate 77.376 Mpps
Power method Universal input, 100—240V AC, 50/60 Hz
Power supply AC/DC, internal, 60W
Supported voltage range 100—240V AC
Max. power consumption 40W
ESD/EMP protection Air: ± 16kV, contact: ± 12kV
LCM display (1) 1.3″ touchscreen
Button Factory reset
Ambient operating temperature -15 to 40° C (5 to 104° F)
Ambient operating humidity 10 to 90% noncondensing
Certifications CE, FCC, IC

Switching Features

Layer 2 features IGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 features –
LEDs
System Status
Ethernet Speed/link/activity
SFP Link/activity
Application Requirements
UniFi Network Version 7.2.94 and later

Ubiquiti USW-48 48-port, Layer 2 switch

The post Ubiquiti USW-48 48-port, Layer 2 switch appeared first on Riaz Computer.

802.3at PoE Gigabit Switches with SFP

Auto-Sensing IEEE 802.3af/at PoE

SFP Ports for Gigabit Fiber Connectivity

Quiet Cooling for Any Workspace

Overview

Expand and power your network with the UniFi® PoE Switch, part of the Ubiquiti® UniFi Enterprise System.

USW-48-PoE 48 RJ45 ports with 4 SFP ports

Fiber Connectivity

 SFP ports enable network uplinks of up to 1 Gbps.

 Fanless, Silent Cooling

The UniFi PoE Switch features fanless, silent thermal cooling*, so it can be deployed in areas where fan noise would be distracting.

Fanless switches must not be stacked.

 Switching Performance

The UniFi PoE Switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.

802.3af/at PoE

PoE support simplifies your network infrastructure and cabling. PoE ports offer 802.3af/at to power your PoE devices, such as UniFi APs and cameras.

Scalable UniFi Network Controller

Management Capabilities

The UniFi Network Controller can provision UniFi devices, map out networks, and quickly manage system traffic. Important network details are logically organized for a simplified, yet powerful, interface.

Network Overview

From a single pane of glass, view network topology and configuration, real-time statistics, and debugging metrics. Monitor your network’s vitals and make on-the-fly adjustments as needed.

Deep Packet Inspection

Ubiquiti’s proprietary Deep Packet Inspection (DPI) engine includes the latest application identification signatures to track which applications (and IP addresses) are using the most bandwidth.

Detailed Analytics

The UniFi Network Controller provides configurable reporting and analytics to manage large user populations and expedite troubleshooting. Advanced search and sorting capabilities make network management more efficient.

Multi-Site Management

A single controller running in the cloud can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers. Each site is logically separated and has its own configuration, maps, statistics, guest portal, and administrator accounts.

Switch Configuration

You can access any managed UniFi Switch through the UniFi Controller to configure a variety of features:

Operation mode (switching, mirroring, or aggregate) per port

Network/VLAN configuration

Jumbo frame and flow control services

Network settings

Storm control setting per port

Spanning tree configuration

802.1X control and RADIUS VLAN

Debug terminal option for command-line interface

Switch Port Status

 You can also view status information for each port:

Connection speed and duplex mode

TX/RX data rates

Network/VLAN setting

Software Features

The UniFi Network Controller software offers the following features:

Centralized configuration management (including configuration cloning)

Auto-MDIX automatically adjusts as needed for straight through or crossover cable

802.1X (RADIUS) authentication and dynamic VLAN

Ubiquiti USW-48-POE 48-port, Layer 2 PoE switch

The post Ubiquiti USW-48-POE 48-port, Layer 2 PoE switch appeared first on Riaz Computer.

Features:

WiFi 6 support (2.4/5 GHz bands)

5.3 Gbps aggregate throughput rate

Horizontal antenna pattern to widen coverage area

(1) GbE RJ45 port (PoE In)*

IPX5-rated, waterproof casing

Adopt the U6-Mesh in Minutes with Your UniFi Network Application and:

Centrally manage multiple networks from an intuitive interface

Enjoy real-time device insights and deep configuration options

Upgrade device firmware remotely

Manage network users and guests with ease

Personalize the design, architecture, and privacy of guest hotspots

Set up devices quickly and manage them on the go with a powerful mobile app

Mechanical

Dimensions Ø48.5 x 159.5 mm (Ø1.9 x 6.28″)
Weight 400 g (0.88 lb)
Enclosure material Plastic, aluminum
Mount materials Plastic
Weatherproofing IPX5

Hardware

Networking interface (1) GbE RJ45 port
Management interfaces Ethernet
Bluetooth
Power method PoE
Power supply UniFi PoE switch
48V, 0.32A PoE adapter (included)
Supported voltage range 44—57V DC
Max. power consumption 11.4W
Max. TX power
2.4 GHz
5 GHz
22 dBm
26 dBm
MIMO
2.4 GHz
5 GHz
2 x 2 (UL MU-MIMO)
4 x 4 (DL/UL MU-MIMO)
Throughput rate
2.4 GHz
5 GHz
573.5 Mbps
4.8 Gbps
Antenna gain
2.4 GHz
5 GHz
3 dBi
5 dBi
LEDs White/blue
Button Factory reset
Mounting Wall, desktop, pole mount (Included)
Ceiling mount (Optional)
Operating temperature -30 to 60° C (-22 to 140° F)
Operating humidity 5 to 95% noncondensing
Certifications CE, FCC, IC

Ubiquiti Access Point U6 Mesh Software

WiFi standards 802.11a/b/g
WiFi 4/WiFi 5/WiFi 6
Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID 8 per radio
VLAN 802.1Q
Advanced QoS Per-user rate limiting
Guest traffic isolation Supported
Concurrent clients 300+
Zero wait DFS Yes*
*Supported with upcoming firmware versions
Supported Data Rates
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 – MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 – MCS11 NSS1/2/3/4, HE 20/40/80/160)

Application Requirements

UniFi Network Version 6.2.51 and later

Ubiquiti Access Point U6 Mesh.

The post Ubiquiti Access Point U6 Mesh appeared first on Riaz Computer.

Expand and power your network with the UniFi Pro PoE Switch, part of the Ubiquiti® UniFi Enterprise System. USW-Pro-48-PoE 48 RJ45 ports with
4 SFP+ ports

Layer 3 Features

In addition to Layer 2 switching protocols and features, the UniFi Pro PoE Switch offers

Layer 3 capabilities, such as inter‑VLAN routing, static routing, and DHCP server functionality.

Near-Silent Cooling

The UniFi Pro PoE Switch can be located in any workspace.

Its integrated fans have built-in PWM (Power Management) control, air ducts and covers, and temperature sensors for the best user experience.

Fiber Connectivity

SFP+ ports enable high-capacity uplinks of up to 10 Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.

802.3bt PoE++

PoE support simplifies your network infrastructure and cabling.

Eight ports offer 802.3bt PoE++ to provide up to 64W of power (per port) to your high‑power PoE devices. Remaining ports offer 802.3af/at PoE.

Power Supply Redundancy

The UniFi Pro PoE Switch supports our PSU failover system, the UniFi SmartPower RPS, model USP-RPS.

If the internal power supply unit fails, the proprietary USP RPS interface acts to mprovide redundant power for backup

UniFi Pro 48-Port PoE Switch
(40) Gigabit RJ45 ports with 802.3af/at
(8) Gigabit RJ45 ports with 802.3bt
(4) 1/10G SFP+ ports
1U Rackmountable (hardware included)

USW-Pro-48-PoE

Innovative Display

The 1.3″ touchscreen displays status information for easy monitoring and quick troubleshooting.

Scalable UniFi Network Controller

Management Capabilities

The UniFi Network Controller can provision UniFi devices, map out networks, and quickly manage system traffic.

Important network details are logically organized for a simplified, yet powerful, interface.

Network Overview

From a single pane of glass, view network topology and configuration, real-time statistics, and debugging metrics.

Monitor your network’s vitals and make on-the-fly adjustments as needed.

Deep Packet Inspection

Ubiquiti’s proprietary Deep Packet Inspection (DPI) engine includes mthe latest application identification signatures to track which applications (and IP addresses) are using the most bandwidth.

Detailed Analytics

The UniFi Network Controller provides configurable reporting and analytics to manage large user populations and expedite troubleshooting.

Advanced search and sorting capabilities make network management more efficient.

Multi-Site Management

A single controller running in the cloud can manage multiple sites: multiple, distributed deployments and multi‑tenancy for managed service providers.

Each site is logically separated and has its own configuration, maps, statistics, guest portal, and administrator accounts.

Switch Configuration

You can access any managed UniFi Switch through the UniFi Controller to configure a variety of features:
Operation mode (switching, mirroring, or aggregate) per port
Network/VLAN configuration
Jumbo frame and flow control services
Network settings
Storm control setting per port
Spanning tree configuration
802.1X control and RADIUS VLAN
Debug terminal option for command-line interface

Switch Port Status

USW-Pro-48-PoE

You can also view status information for each port:
Connection speed and duplex mode
TX/RX data rates
Network/VLAN setting
Software Features
The UniFi Network Controller software offers the following features:
Centralized configuration management (including configuration cloning)
Auto-MDIX automatically adjusts as needed for straight through or crossover cable
802.1X (RADIUS) authentication and dynamic VLAN

You amy also like to check out: UBIQUITI USW-PRO-24-POE

The post Ubiquiti USW-Pro-48-PoE Layer 3 switch 600W appeared first on Riaz Computer.

• • Ubiquiti PoE Injector 48V DC 24W Gbit – POE-48-24W-G
  Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:

Surge protection

Clamping protection

Maximum surge discharge

Peak pulse current

AC cable with earth ground

• You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors.

  Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products.

• The PoE Adapters are compatible with most Ubiquiti PoE devices*, including:

  • airFiber®
  • airMAX®
  • EdgeMAX®
  • mFi®
  • UniFi® AP
  • UniFi Protect / airVision®
  • UniFi LED
  • UFiber

  Check product specifications to verify PoE compatibility.

   Ubiquiti PoE Adapter Compatibility with the airGateway® Specific PoE Adapter models are designed to work with the airGateway.

   The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber’s local network to the WISP network.

  The airGateway is available in three models:

  • airGateway Standard model with an internal antenna
  • airGateway Pro Dual-Band Wi-Fi model with an internal antenna
  • airGateway-LR Long-range Wi-Fi model with an external antenna for extended range

  Protection Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:

  • Surge protection
  • Clamping protection
  • Maximum surge discharge
  • Peak pulse current
  • AC cable with earth ground

  Electrostatic discharge (ESD) is the leading cause for outdoor device failures.

• You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCable, and TOUGHCable Connectors.

• Ubiquiti PoE Injector 48V DC 24W Gbit – POE-48-24W-G

The post Ubiquiti PoE Injector 48V DC 24W Gbit – POE-48-24W-G appeared first on Riaz Computer.

High-performance, indoor/outdoor WiFi 6 access point with extended signal range.

Compact, dual-band WiFi 6 access point with flexible mounting options. Ubiquiti Access Point U6 Long-Range

 

5 GHz WiFi 6 band (4×4), 2.4 GHz WiFi 4 band (4×4)

3.0 Gbps aggregate throughput rate

Horizontal, downward-tilted antenna pattern to widen coverage area

(1) GbE RJ45 port (PoE In)

Powered with PoE+

 

Works with the UniFi Network Application

Centrally manage multiple networks from an intuitive interface

Enjoy real-time device insights and deep configuration options

Upgrade device firmware remotely

Manage network users and guests with ease

Personalize the design, architecture, and privacy of guest hotspots

Set up devices quickly and manage them on the go with a powerful mobile app

• Best-in-class Wi-Fi coverage and performance

  With its Wi-Fi 6 capability, the U6-LR will strengthen your enterprise environment with the widest, most reliable coverage yet.

  Wi-Fi 6

  Better performance in crowded environments

  4-Stream AP

  Faster download and upload speeds

  Full-duplex 1 Gbps

  Support full-duplex 1 Gbps TCP/IP performance

  Bluetooth 5.0

  Fast discovery
  and setup

  Four-stream high-efficiency Wi-Fi 6 technology

  Wi-Fi 6 APs deliver an aggregate radio rate of up to 3 Gbps with 5 GHz (4×4 MU-MIMO and OFDMA) and 2.4 GHz 4×4 MIMO radios

  124% speed increase

  

  Powerful, wider wireless coverage

  The U6-LR access point utilizes Wi-Fi 6 technology to provide strong and expansive wireless coverage to all enterprise networking environments.

  2x coverage increase

  

  Simultaneously connect to more devices

  Create and support over 300 distinct client connections.

  

  Easily set up and grow your network

  The U6-LR access point seamlessly integrates with the UniFi Application and simplifies network bridging.

  

  UniFi Application

  Host, configure, and monitor all of your network devices from a central mobile interface.

  Download Mobile App

   

  Know more about your network than ever before

  Device IdentificationTraffic IdentificationThreat Protection

The post ubiquiti Access Point U6 Long-Range appeared first on Riaz Computer.

The Switch 24 (USW 24) is a fully managed, fanless switch with (24) GbE RJ45 ports and (2) 1G SFP ports.

The versatile USW 24 provides Gigabit links to Ethernet devices while also supplying Gigabit fiber uplink options fit for an enterprise network.

The switch also offers an extensive suite of Layer 2 switching protocols, including port-specific operation modes (switching, mirroring, or aggregate), and features a 1.3″ LCM color touchscreen that concisely displays key system and connection insights.

This switch can also be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.

Features:

(24) GbE RJ45 ports

(2) 1G SFP ports

(1) 1.3″ LCM color touchscreen with AR switch management

Fanless, silent cooling

Technical Specifications

Mechanical
Dimensions 442 x 200 x 44 mm (17.4 x 7.9 x 1.7″)
Weight Without mounting brackets: 2.7 kg (6 lb)
With mounting brackets: 2.8 kg (6.2 lb)
Enclosure material SGCC steel
Hardware
Management interface Ethernet In-Band
Networking interface (24) GbE RJ45 ports
(2) 1G SFP ports
Total non-blocking throughput 26 Gbps
Switching capacity 52 Gbps
Forwarding rate 38.69 Mpps
Power method Universal input, 100—240V AC, 50/60 Hz
Power supply AC/DC, internal, 36W
Supported voltage range 100—240V AC
Max. power consumption 25W
ESD/EMP protection Air: ± 16kV, contact: ± 12kV
LCM display (1) 1.3″ touchscreen
Button Factory reset
Operating temperature -5 to 45° C (23 to 113° F)
Operating humidity 10 to 90% noncondensing
Certifications CE, FCC, IC
LEDs
System Status
Ethernet Speed/link/activity
SFP Link/activity
Application Requirements
UniFi Network Version 7.2.94 and later

Ubiquiti USW-24 Layer 2 switch

The post Ubiquiti USW-24 Layer 2 switch appeared first on Riaz Computer.

The Switch Pro 24 (USW Pro 24) is a fully managed switch with (24) GbE RJ45 ports and (2) 10G SFP+ ports.

The USW Pro 24 combines a rich set of Layer 2 features with advanced Layer 3 tools including inter-VLAN routing, static routing, and a DHCP server.

The USW Pro 24 is an ideal aggregation and access layer switch for any UniFi system.

It combines innovative, near-silent cooling capability with SmartPower RPS (USP RPS) power redundancy.

The switch can also be monitored and configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.

Features:

(1) 1.3″ LCM color touchscreen with AR switch management

(24) GbE RJ45 ports

(2) 10G SFP+ ports

(1) USP RPS DC input

Near-silent cooling

Layer 3 switching features

Managed with the UniFi Network application: Version 5.12.11 and later

Technical Specifications

Mechanical
Dimensions 442.4 x 285.4 x 43.7 mm (17.4 x 11.2 x 1.7″)
Weight Without mounting brackets: 3.5 kg (7.7 lb)
With mounting brackets: 3.6 kg (7.9 lb)
Enclosure material SGCC steel
Hardware
Management interface Ethernet In-Band
Networking interface (24) GbE RJ45 ports
(2) 1/10G SFP+ ports
Total non-blocking throughput 44 Gbps
Switching capacity 88 Gbps
Forwarding rate 65.472 Mpps
Power method Universal input, 100—240V AC, 50/60 Hz
USP RPS DC input 11.5V DC, 2.61A
Power supply AC/DC, internal, 36W
Supported voltage range 100—240V AC
Max. power consumption 30W
ESD/EMP protection Air: ± 16kV, contact: ± 12kV
LCM display (1) 1.3″ touchscreen
Button Factory reset
Shock and vibration ETSI300-019-1.4 Standard
Operating temperature -5 to 45° C (23 to 113° F)
Operating humidity 10 to 90% noncondensing
Certifications CE, FCC, IC
LEDs
System Status
Ethernet Speed/link/activity
SFP+ Speed/link/activity
RPS Status
Application Requirements
UniFi Network Version 5.12.11 and later

Ubiquiti USW-PRO-24 Layer 3 Switch, 24 GbE RJ45 2 10G SFP+

The post Ubiquiti USW-PRO-24 Layer 3 Switch, 24 GbE RJ45 and 2 10G SFP+ Ports appeared first on Riaz Computer.

Indoor, dual-band, 802.11ac Wave 1 access point with a 1.1+ aggregate throughput rate.

The Access Point AC Lite (UAP AC Lite) is a high-performance, indoor, 802.11ac WiFi access point that utilizes Wave 1 technology to reach a 1.1+ Gbps aggregate throughput rate with its 5 and 2.4 GHz bands. The UAP AC Lite broadcasts its signal up to 122 meters (400 feet) away, allowing for greater multi-user support from further away. This access point can be powered with either 802.3af PoE or 24V passive PoE802.3at PoE+ *, and it is equipped with (1) GbE RJ45 port for high-speed LAN connectivity. The UAP AC Lite can be set up in minutes and fully managed with the UniFi Network web application or mobile app.

Features:

• • 802.11ac Wave 1 WiFi technology
  • 5 GHz band with a 867 Mbps throughput rate
  • 2.4 GHz band with a 300 Mbps throughput rate
  • Powered with 802.3af PoE* or 24V passive PoE
  • (1) GbE RJ45 port

The post Access Point Lite UAP-AC-LITE appeared first on Riaz Computer.

5 GHz PtMP LTU BaseStation Radio, functions in a PtMP environment using the LTU Pro, LTU Lite, or LTU LR as Clients.

Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Rocket is a Point-to-MultiPoint (PtMP) 5 GHz Access Point featuring 2+ Mpps processing, proprietary RF filtering, and flexible GPS sync for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. A custom co-processor is included for future performance and feature upgrades.

Functions in a PtMP environment using the LTU-Pro, LTU-Lite for subscriber stations.

The post Ubiquiti LTU Rocket 5 GHz PtMP LTU BaseStation Radio appeared first on Riaz Computer.