Description
LBE-5AC-GEN2
LBE-5AC-GEN2 , Ultra-lightweight design with proprietary airMAX ac chipset and dedicated management Wi-Fi for easy U Mobile app support and fast setup.
This airMAX ac CPE features adjustment flexibility in three axes for versatile mounting options.
Improved Radio Design, Mounting and Surge Protection
Management WiFi Radio/U-Mobile App
AirOS v8.1 New UI
Overview
Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the LiteBeam® 5AC Gen 2, with dedicated Wi-Fi management.
Improved Noise Immunity
The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth.
With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved.
This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Innovative Design
Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.
Featuring high performance and innovative mechanical design, the LiteBeam 5AC Gen 2 is versatile and cost-effective to deploy.
Software
airOS® v8 is the revolutionary operating system for Ubiquiti® airMAX ac products.
Powerful Wireless Features
Access Point PtMP airMAX Mixed Mode
airMAX ac Protocol Support
Long-Range Point-to-Point (PtP) Link Mode
Selectable Channel Width
PtP: 10/20/30/40/50/60/80 MHz
PtMP: 10/20/30/40 MHz
Automatic Channel Selection
Transmit Power Control: Automatic/Manual
Automatic Distance Selection (ACK Timing)
Strongest WPA2 Security
Usability Enhancements
airMagic® Channel Selection Tool
Redesigned User Interface
Dynamic Configuration Changes
Instant Input Validation
HTML5 Technology
Optimization for Mobile Devices
Detailed Device Statistics
Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView® Spectrum Analyzer
UNMS App
The LiteBeam 5AC Gen 2 integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
Accessing airOS via Wi-Fi
The UNMS™ app provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play™ (Android).
UNMS allows you to set up, configure, and manage the LiteBeam 5AC Gen 2.
It offers the following options once you’re connected or logged in to the device:
Status
Check link status information or the basic configuration settings of the LiteBeam 5AC Gen 2.
Configuration
Change or update the existing configuration of the LiteBeam 5AC Gen 2.
Tools
Access tools for initial installation and configuration of the LiteBeam 5AC Gen 2.
Actions
Back up or update the configuration, upload new firmware, reboot the device, reset the device to factory defaults, access the airOS UI in the web browser, or disconnect from the
LiteBeam 5AC Gen 2.
You may also like to check out: BELKIN RT 1800
